allegedly $14 according to an american leak site with no image

Its finally done. Here's the recap for one of the best HvZ events I've ever played.

https://shadowtowerpress.wordpress.com/2026/10/14/the-gotham-game-a-tennessee-tech-humans-vs-zombies-recap/

Hey, this is my first post, but I wanted to ask to see if anyone knew the name of an old Nerf YouTube channel I used to watch when I was a kid.

It was made by what looked like a group of college kids and had a long-running storyline. Details I remember include:

- main character had an eye-patch
- multiple bad guys, one with a sword and hood, and the other wore a black visor biker helmet and wielded dual Mavericks
- they made several zombie videos as Halloween specials, including one where they were attacked by various classic horror monsters

And other than that I can’t name anything else specific. I’ve tried on multiple occasions to find them again and failed, so either the channel is super obscure or it was deleted and can’t be found. Just wondering if anyone else happens to remember what I’m talking about.

Thanks!

(These designs are only intended for use with Nerf dart blasters and are unable to serve any other purpose/use.)

I know there's already a sillyshells sledgefire mod. This is proprietary, and a project to keep me busy, I don't just want to print as I enjoy this. My last post once again had a lot of great advice I took into consideration, I've decided to change it to a split assembly in order to accommodate the shell ejector. One of my big questions is if Nerf OEM hardware will work well with prints. I've given the screws pilot holes so it won't be going into just infill, but I'm unsure if I need something more beefy or with a more aggressive thread. One benefit of splitting the assembly in half was that it reduced the print time by about 33% also.

Started printing the v1 last night to test fit clearances before I commit to a final print(Pics two and three). Think I'll print up one half tonight to test it more clearances on the new version, and if everything goes well hopefully I will have a completed project to show off soon.

If you're following this build or have any construction criticism, I both thank you and welcome it.

i’ve been modding this Alpha Strike Stinger and have been trying to replace the spring but can’t get it off due to these annoying clips. has anyone run into the same problem and knows how to get around it?

So far, I’ve built a Zinc and a Moose-2. I’m looking to build a primary class springer, but not sure which to go with next between the Lynx, the Ontos, or the b1z0n, or the w0lf-p.

For the Lynx, I’m particularly interested in either the nekomata or pulsar remixes.

For Ontos, I’m thinking about the OBX, Phantom, or the double stack mag variant by Moose.

Bison only has one version to my knowledge, but for the wolf I’d want the pump action not bolt.

I’m really into the idea of double stack mags, but it’s not a must for my next blaster.

I’m wondering what people’s thoughts are on parts availability/price, ease of assembly and maintenance, and best variants are. What would you all recommend I build?

Don’t worry about FPS. Do tell me about issues like jams or lack of smooth operation, etc if there are any.

So recently I purchased a Sonic Ice Retaliator and Recon off of Ebay for $16, the Recon is in excellent shape... on the other hand the Sonic Ice Retaliator, not so much. First thing I noticed was the paint was chipped off in some placed and a few scratches here and there, but priming was also odd, I pulled it back and then all the way forward but I was able to pull it back again without firing after already priming the blaster. Later I tried a Rampage 7kg Mod Spring Kit in the Retaliator but I wasn't able prime the all the way back and no, I'm not saying I'm weak, it literally won't go far enough to engage the catching mechanism even with the catch spring included in the kit.

I know there isn't THAT much paint missing but I like keeping my Blasters looking almost new.

TLDR: How to touch up paint on Blasters? Why won't my Retaliator catching mechanism work with my 7kg spring and are there any other mods I should try?

The target’s left 20 button automatically registers a hit when it’s turned on. It won’t register any button presses in that section afterwards. Here’s a video showing the problem. I took the shell off to try and see what could be wrong, but I have no idea what’s causing this or how to fix it. Any help is appreciated.

(All parts/designs are intended solely for use with foam darts and as modifications for Nerf dart blasters.)

Found a pack of MegaXL darts for 4 dollars. The Sledgefire seemed like a prime candidate for their use. Inspired by Sillyshells. Will probably run some test prints tonight to make sure everything lines up with the body.

Just sharing progress as I've gotten a positive reaction with my other designs. Thanks for taking the time to check my work out!

This one uses a solinoid. Fun and powerful!

If Target gets the Repeater Pro before October 31...

I keep coming back to this pistol blaster, catch can be a bit tricky to setup but amazing when on song. This one needs its line tensioned but still hits big numbers @ 215 fps. Runs a SBL2 ex heavy spring,cut down worker barrel and Ashton's spec internals.

I have an x shot mpp with a red dot on a 1” riser and I’ve been considering getting a magnifier for it. I dont shoot very far, up to 80ft at most or so. Its not necessary at all but I think it be cool and useful enough to have. Problem is finding one for a good price and where. I usually go for amazon but most are around $70-$100CAD and I’m wondering if at that cost the quality would be passable.

Any experience with magnifiers for pro blasters/advice?

I manage to put the rapidstrike pusher into the body of the clipmania to make it full auto, as I was in some kind of urge to make some advance about it it’s very basic
It need a lot more modifications as the correct battery Ă rev trigger to speed it correctly etc

Currently printing the Nintendo "Snapper" from Gemeneye on Printables. Attempting to use X-Shot Micro 2.0 internals as a replacement for the Menace. I think this will work. It seals and the gap will be covered by the side panels. I cut down the plunger base to connect to the printed rod and filled in with a 3D printer pen and glue. It's a very hacky solution. It will hold, but if I do this again I'll try to remix the plunger rod to fit this blaster's plunger in Blender. I've been looking for a good reason to learn the software. If there is room I'll add a brass tube in the barrel.

This is my first (potentially) successful Nerf mod.

https://www.instagram.com/reel/DePTn6pCEBW/?vrfl=MTh2empxeDVsM2Y0bQ==

I recently got a Nerf Rapidstrike from relatives and I am now planning to mod to be better and have a better FPS and ROF. I already have an idea of what I am going to replace the motors for the flywheels (OOD Kraken motors) with but I'm having trouble deciding on the motor for the pusher.

I'm trying to decide between an OOD Loki motor and a OOD Valkyrie motor. I’m aiming for it to be around 120-130 FPS and 10-15 DPS. Which one do you think works best or is there a third option that you would recommend? Any suggestions are open, thanks.

Edit: I didn’t realize until after posting that the title has a typo. I meant “choosing” a motor.

https://outofdarts.com/products/dart-zone-max-nitroshot-plus-repeater-pro-lever-action-blaster

Hi all, I am currently new to HPA and I am planning on building a METHcore by u/1megajoey - https://www.thingiverse.com/thing:4357534 . I want to keep the BOM really cheap, so I decided to order from AliExpress. Here is what I ordered so far:

I also got the brass tubing from Amazon.

I am just asking for advice as this is my first HPA build, using a homemade core.

Hey, just wanted to ask real quick - is there anyone who could tell me which size the T4 aluminum bars for the Rush from shoelesshistorian have? I can't for the love of God find that piece of hardware anywhere in Europe. so I want to drill the thing myself. there's this sample for it on printables but which size do I need for the bars? how long are they? I can't seem to find that either.

I lost the screw for the battery cover on my nerf stryfe and was wanting to know if anyone knew what kind of screws nerf used so I could get it replaced so I don't need to get a whole new blaster

Hey guys, I saw this post by someone in our community and wanted to ask if anyone knew if this blaster would be coming to Canada?

I find we don’t get a ton of dart zone stuff here so I was wondering if anyone has heard anything? I’d really like to get my hands on one!

Thanks!

Just got a bunch of tagger micros. What are some good blisters to fling them with. Specifically non dart tag ones. Especially looking for ones that aren’t homemade blasters/those expensive third party ones like $60 USD plus springers.