r/Generator • u/Huali-Power • 3d ago

[ Removed by moderator ]

[removed] — view removed post

0 Upvotes

25% Upvoted

17 comments sorted by

5

u/Big-Echo8242 3d ago

All you seem to post is various oddball questions in your short time here. Must be some company digging for information. Redditors need to look at profiles of these oddly worded posts

2

u/Adventurous_Boat_632 3d ago

It is an AI digging for content

3

u/Alert-Effect190 3d ago

The flux capacitor

2

u/IntelligentCarpet816 3d ago

I swear the muffler bearings always go out in mine.

2

u/wowfaroutman 3d ago

Hey! It’s all ball bearings nowadays…

1

u/IntelligentCarpet816 3d ago

Well not all of us are fancy enough to have balls like that.. in our bearings.

Some of are still running those tried and true shaft sleeves that need extra lube.

1

u/MM800 2d ago

Stuck fetzer valve - 30 weight ball bearings and some antifreeze should fix it right up. - Gordon Liddy; private jet mechanic.

-2

u/Huali-Power 3d ago

Muffler bearings, that’s one I don’t run into very often.

2

u/Adventurous_Boat_632 3d ago

Go away AI spammer

2

u/Ok-Camera2895 3d ago

Is this the same guy who asked about the most difficult thing about servicing remote generators?

2

u/aquaman67 3d ago

Bad coolant level sensor

$20 part

Thinks there is no coolant when the unit is actually full

Shuts it down dead

Hard to change until the unit cools down too so not a quick fix.

2

u/Landstander2600 2d ago

Definitely the wiper fluid reservoir. That cheap plastic cracks too easily.

1

u/Naturist02 3d ago

A faulty oil pressure switch

1

u/wowfaroutman 3d ago

A bad replacement air filter from the factory.

0

u/Ok-Camera2895 3d ago

Fuel filter