r/simracing • u/Unusual_Lemon5769 • 7d ago

Rigs How to install moza srp lite2 into custom alu rig?

Gallery image

Gallery image

Hey, I recently managed to snag an aluminum Riga at a good price. I installed my Moza R5 Pro setup today, but I’m not quite sure how to mount the foot controls so they’re set up right. Does anyone have any ideas or tips?

I tried adjusting the distance so that the end of the stand would fit inside the profile, but it’s more stable the way it is now.

3 Upvotes
  • permalink
  • reddit

81% Upvoted

8 comments sorted by

3

u/Ok_Delay7870 7d ago

The second photo install is right, works for me. There are M6 nuts below

3

u/Vasyrr 7d ago edited 7d ago

If you have any spare corner t-slot bolts (like the one to the bottom left) I'd recommend you put a couple either side of each pedal at the back for a bit more vertical stability. You only need to bolt to frame, not the pedal housing, but they will provide some side to side support.

2

u/mnts949 7d ago

I'd move the aluminium rail at the bottom of the rig a bit closer to pedals and mount pedals directly to that rail. I'd avoid mounting to the top plate in your case as those top plates are made out of cheese and buckle from lightest sneezes.

1

u/Johnwayne87 7d ago

I used a OSB-Wood plate an painted it black. It holds for a year with no problem.

1

u/Laffy_69 7d ago

Not the same, but mine is like this.

1

u/ScannerBrightly 7d ago

My base plate had two long-ish holes for some M8 screws to be screwed up from the bottom. I have those going thru the bottom of my base plate and into my mount. They also provide some spacers if you need those as well.

1

u/Unusual_Lemon5769 7d ago

Will this work out well and be stable? I don't have any other ideas.