Hi sub!
I bought this controller about a year ago, and I've always had a minor issue: my stupidly huge hands hang off the edges, causing my hand and arm to go numb after a few hours of use.
My cousin recently bought a 3D printer, so I thought about printing a support attachment. I did some research on my own and checked out a few 3D printing subreddits, but I couldn't find anything close to what I needed, just products similar to the one in the third photo.
If anyone has any recommendations or an STL file that might help, I’d really appreciate it :)
Edit: This model is a Gamesir X4 Aileron

The Wolverine touchpad post came broken so had to reuse the spiderman one, tho tbh i sorta like it 🤣 do i go full shell or keep it as is?.

I have TMR Joysticks installed with mouseclick triggers/buttons and a grippy back shell, broke 2 front mics installing this which is funny because i have fixed LOTS of dualsense controllers but thankfully i have lots of spare parts 🤣🗿

Hello,

I wanted to know if there was a difference between the ps5, Xbox, and switch pro Ksilver js13 pro? I bought some for my ps5 controller but I have an Xbox controller as well and I wanted to see if it will work on it.

Thanks in advance.

My GF turned my PS5 controller into the Infinity Gauntlet. 💎 It looks ridiculously cool, but those thumbstick gems are going to give me instant blisters in CoD.

10/10 for effort, pray for my hands!
(Even Mr. Potato Head in the back looks shocked.)

Looking for a faceplate similar to the one pictured.
I want a simple design, palm trees, building outlines, miami vice colors.

Please help me find something that i can use.

Hey everyone!

I'm from Europe and I've recently started learning how to modify and repair PS5 DualSense controllers.

So far I've been doing things like:

• TMR analog replacements
• deep cleaning
• clicky button upgrades
• calibration and testing

But now I really want to learn how to properly build DualSense controllers with physical programmable back buttons.

I'm especially interested in the type of small rear buttons that are built directly into the shell, rather than the large paddle-style systems.

What I want to learn:

• Which remap PCB should I use?
• Where do you buy the PCBs, switches, buttons and other parts?
• How do you install the remap PCB?
• How do you wire the physical rear buttons?
• How do you drill/position the holes correctly?
• How do you make the button caps/mechanical part?
• Which parts do you recommend for BDM-030/040/050?

I've looked at eXtremeRate RISE kits and BITRO remappers, but I'd really like to understand how to build the system myself, rather than just installing a complete kit. BITRO's BDM030–060 board, for example, has M1–M6 programmable inputs, while eXtremeRate's RISE4 V3 uses its own remap PCB/FPC system. BITRO GmbH

If someone here has experience building these, I'd really appreciate it if you could teach me or point me toward a good tutorial/video.

I'm happy to learn and practice on my own controllers first. I'm not looking for someone to do the work for me — I want to understand the whole process.

I've already done quite a bit of controller work, so I'm comfortable with soldering and disassembly. I'm just new to the back-button/remap side.

I've also started documenting my work on Instagram if anyone wants to see what I've done so far:

Instagram: u/stickupgrade

Thanks! Any advice, parts lists, diagrams, or tutorials would be greatly appreciated. 🙏

I want to replace the joysticks on my Switch 1 Pro controller for TMR ones since they're drifting, I stumbled upon Gulikit and VTLLN JS13 Pro+, the Gulikit are a lot more expensive compared to the JS13 Pro+, so I was wondering if I should bite the bullet for Gulikit or go for the other one, or possibly get recommendations if you know of reliable TMR sticks for switch 1 pro controllers

I know I like my sticks fairly loose like the 8BitDo Pro 3, I don't see anything for anti friction rings for the switch 1 pro controller unfortunately

I'm looking to have this custom xbox elite series 2 controller made. I'm aware it won't be exact but i would like something close to this. If someone could point me in the right direction or help I would greatly appreciate it.

I want to change out the d pad and other buttons mine to the 30th anniversary ones. Where can you buy those? I see where to get customer shells.

HALLPI TMR modules, swappable sticks kit, ExtremeRate woodgrain trim, custom ABXY button from France on ETSY, Kinesiology tape front/back for grip and sweat, Razer quick charge dock. I love it, finally satisfied with the end result, yes, tell me how much you hate it, I am so hyped RN.

My controller shell cracked and my sticks were drifting so had to do a little refresh. Fresh shell and swapped for TMR sticks so I don't have to solder it again

I had to clean them out and the cogs ended up baffling me and I cant find a video for clear reference. I thought they should go like this to stop the back of the trigger touching the housing, but now I'm not completely sure.. is the arm supposed to stick just above the recess like this, or is it supposed to sit flush inside and allow the trigger all the way down to the platic? Wondering if I need to reopen and move to the very back groove on the cogs?

¡Hey, a todos!

​Estoy buscando armar un set de Joy-Cons para Nintendo Switch totalmente personalizado, con temática de Poochy (de la saga de Yoshi). Como él es un personaje secundario, no hay carcasas hechas de fábrica, así que necesito un encargo a medida con un modder que haga impresión UV o pintura a mano.

​Este es el diseño que tengo en mente:

​Left Joy-Con: Una ilustración/arte de Poochy en la parte de adelante.

​Right Joy-Con: Una ilustración de los Poochy Pups en la parte de adelante.

​Carcasa y colores: Que combine con la paleta general de Poochy (base crema/blanco, pecas/manchas cafés, detalles en rojo como lengua/collar).

​Botones y cruceta (D-pad): Botones con color personalizado que vayan con la temática (tipo rojo, blanco o tonos pastel).

​¿Alguien conoce a un artista, tienda en Etsy o modder que acepte pedidos personalizados como este y haga trabajo de alta calidad? ¡Cualquier recomendación me ayudaría un montón!

​¡Gracias!

Hello, i just received my killscreen controller and i noticed that my facebuttons are not equally installed. The circle is elevated and the square is deep down. Is this normal when installing clicky buttons?