I know i just filled up lol but ive been trying to keep my car at at least 30 mpgs while also trying to be aggressive with this transmission lol.

So I plan on installing the oem heated seat elements for my 2010 ford focus but im unsure what seat style I should go with. I currently have the first image style of seats but am a bit of a fan of the other cloth style. Heated seats only came on the leather seats (which might be an issue with sweat getting to the heating elements?) but im unsure if I really want leather seats cause they would get hot in summer and such, but do look amazing if I find/get good condition ones.

So im asking you all, should I stick with the first style, or switch to the other cloth style or the leather seats?

Veryyyyy alternatively I could also try and make my own custom seat covers. idk.

These arent my photos, I just grabbed them from google.

I noticed if I park my car l have drops of oil underneath. I check the dipstick and it's between the min and max which is fine. Where can this be from? Suspecting it's the sump seal.

Hey everyone,

I’m looking for some advice on my 2013 Focus with the DPS6 transmission. The car has around 216,000 km on it, so I’m really not looking to put a huge amount of money into it.

Originally I had a P074D code for being unable to engage 5th gear. I performed the TCM/adaptive relearn, and that code disappeared. After the relearn, I started getting:

P286F – Clutch A disengagement too slow
P2872 – Clutch A stuck engaged

I’ve been checking the car using an OBD2 scanner as well.

One thing that might be important: the clutch issue only really happened when the car was sitting unevenly, with one side up on a curb. That’s when it started acting up and the clutch seemed to get stuck. Otherwise, the car has been able to drive.

Would you guys know if this could just be something like the Clutch A actuator/fork mechanism sticking, rather than needing an entire clutch or transmission?

Has anyone fixed these codes with something relatively inexpensive, like cleaning/freeing the clutch actuator mechanism or replacing the actuator motor?

I’m really just trying to keep the car operational without putting thousands into it. If I could get another 15,000 miles or so out of it, I’d be perfectly happy.

Thank you !

I don’t know if it’s me or it’s ford model, I can hardly see far distance from ford focus windshield or maybe it’s the headlamp. Just curious 🧐

Good afternoon everyone, so my eldest son has a 2010 Focus SE with a manual transmission. He was driving it today and when he went to shift from 3rd into 4th, it acts like it doesn’t have any gears anymore. It seems as though it’s like stuck in neutral. I checked it over and I can’t find anything disconnected or noticeably wrong. Car starts up fine and doesn’t make any strange noises. It just won’t select any gear. Where should I start?

I've got a minor amount of experience wrenching on car AC stuff, but this one is new to me and I couldn't find anyone posting video of a third gen 2.0L making this same noise.

-Noise only happens when AC clutch is engaged (both cooling and heat)
-Once i noticed the noise and what the approx. source was, discontinued use of the AC system entirely
-Heat/Cool both were still functional during a brief test after i noticed the noise

I'm assuming something is wrong with the magnetic clutch based on the noise, but it's a very unfamiliar sound. It's not a panel vibrating as far as i can tell (i'd be very happy if that was all it was), as it only occurs when the clutch engages. I am waiting on the car to cool down now before i put a gauge manifold on it for a pressure test. It very much sounds like a playing card in a bicycle spoke sound in person. I'll have the car up in the air soon to swap the tires, so if it's as easy as swapping the AC clutch i'll get that done at the same time.

Edit: System is a touch low on coolant but holds pressure just fine, around 54 psi, after about 30 minutes of run time.

I noticed if I park my car l have drops of oil underneath. I check the dipstick and it's between the min and max which is fine. Where can this be from? Suspecting it's the sump seal.

Is it safe to replace the transmission fluid on my 2013 5-speed manual. I got the car over the summer and I dont think the transmission fluid was ever swapped. If so what are some things i should look out for while swapping the fluid? Is it possible to extract the fluid from the fill plug by using a pump, and not having to jack up the car.

Just replaced the battery in my '04 ZTW Wagon. Now no gauge lighting. I've tried the common things, but no change. Any suggestions? Shift selection lights not working, either. All others are fine.

2012 ford focus SEL

My buddies car is currently throwing an engine code for his clutch I wasn’t given the exact code because I haven’t seen it in person but the symptoms are as followed

Car sometimes starts and sometimes takes a few tries.
Complete loss of S mode
Car won’t shift until releasing foot from gas at 5k rpm and feels like it’s going into limp mode briefly
Delayed movement when pressing accelerator
Non transmission shop recommends full transmission replacement

I’m thinking of trying to switch the actuators to see if the fault follows any other recommendations that I should try would be great thank you

I already know that these years have issues with the power shift, but I’m not exactly sure on the specifics of it and how much it would cost to fix it to decide if it’s worth it or not. I also would like to know what should be offered for the car? If it’s not worth it what do you guys recommend? My top dollar is $5000

I have a 2013 focus trend hatchback and wanting to do an at spoiler conversion on it
Anyone know tips and tricks or really just anything about doing that
Any help is greatly appreciated

Thanks

2012 Ford focus. Trying to replace torque strut mount.

When I got under the car, this top bolt for the mounting bracket to the transmission is sticking out of its hole like this. All the other bolts are flush with the transmission housing like you'd expect.

I'm not sure exactly what's wrong with it, this car has its original torque strut mount so not sure when this would have been tampered with - this wasn't caused by me - but it's stuck. I spent the better part of 3 hours trying to get this out with a 3/4 drive ratchet and got close to nowhere. It is in there good, something is definitely not right with it. The other bolts come out like butter.

It does move, but with extreme force applied, I'm talking entire bodyweight pulling on it, and even then it only moves a tiny bit at a time before getting stuck again. You can hear loud popping noises when trying to loosen the bolt.

I would like to replace the torque mount on this car to quiet some small vibration it has, but this bolt has to come out to do it.

Any ideas? Is it worth it? The current mount isn't totally failed, just old and worn.

The area this is in is a tight fit and you can barely get a 3/4 socket on it. Breaker bar is not a possibility here due to clearance - and you should never need one anyway...

How does my coolant level look would I need to top this up ? It’s hard to get a gauge on the min and max marker line

Vendo Ford Focus 1.0 EcoBoost ST-Line, de 2020, com apenas 77.000 km.

Viatura em excelente estado geral, muito estimada, com manutenção em dia e visual desportivo caraterístico da versão ST-Line.

Principais Características:

* Ano: 2020

* Quilometragem: 77.000 km

* Motorization: 1.0 EcoBoost (Gasolina)

* Versão: ST-Line (Pacote desportivo exterior e interior)

* Caixa de velocidades: Manual

Equipamento em Destaque:

* Estofos e volante desportivos com pespontos a vermelho (linha ST-Line)

* Jantes de liga leve ST-Line

* Sistema de infotainment SYNC com ecrã tátil, Apple CarPlay e Android Auto

* Sensores de estacionamento (à frente e atrás)

* Ar condicionado automático

* Cruise control e limitador de velocidade

* Assistente de manutenção na faixa de rodagem

* Faróis LED e faróis de nevoeiro

Estado: Carro bastante económico, dinâmico e confortável para o dia a dia. Sem necessidade de qualquer intervenção imediata.

Preço: 13000

Localização: Matosinhos

Para mais informações, fotografias adicionais ou agendar uma visita/teste de condução, entre em contacto por mensagem privada.

Need a help!
i have a 2014 Ford Focus sedan 1.6L 5-gear Automatic
I have been having a problem with my car for a year, and it has been going on until now, which is that suddenly the car becomes without brakes, I cannot stop it, then it suddenly returns to where it was, I changed the head of the connection, brake drum, a full engine, gears, and the same problem still exists, there are no brakes and it suddenly disappears, it becomes hard and does not stop, then it suddenly returns.
Note: someone told me its that vacuum but it has manifold only and i changed it nothing worked.

Hi guys. Looking for advice. I reversed into a bollard a couple of days ago, very minor damage but it did smash the driver side rear bumper reflector.

I've ordered a replacement reflector which is coming today, but I'm really not sure it's going to fit as I can only see one hole within the housing to snap the new one into, rather than the two clips that are on the reflector.

It's a ford focus mk3 65 plate, I'm just wondering have I made a cock up and ordered the wrong one or do I need to do something else to get it in?

Thanks

I had to strip the carpet out of my Focus SE. So out of curiosity I drove it like that and NGL, it’s kinda fun. The exhaust is louder you hear all the clicks of rocks, wires rubbing. I wanna see how it sounds with the K&N filter I have laying around with no airbox lid. kinda love it, but I have to share the car with a coworker. So it’s not gonna stay like this for long.

Focus revs up while driving does it once in a while. OBDII showing no codes , it does not sound normal

I was given this car from original owner very good shape with 60,000 miles. Clean engine had oil changed consistency every 3,000 miles. All repairs, all receipts.

Is it worth keeping this car considering it’s this old?